The ET0102-GP1 (TX)/ET0101-GP2 (RX) is an HDBaseT 2.0 HDMI Extender featured ARC and 4 Port Ethernet Switch. It transmits 1080p@60Hz via single Cat5e up to 100 meters and 4K@60Hz (4:2:0) to 90 meters. Bi-directional IR, RS232 and Ethernet can also be transmitted over the same Cat5e/Cat6 cable. With support of POH, only one power supply is needed at either TX or RX side. Toslink input receiver can work with legacy products for audio return to audio surround receiver. Besides, audio from ARC can also be extracted via both Toslink and L/R at TX side. The extender can also be used stand-alone as an Audio extender.

Features:

• Audio Return Channel (ARC) supported backwards Toslink input.
• Audio extractor for ARC at TX side via Toslink and L/R.
• Supports HDMI 1.4 1080p@60Hz and HDMI 2.0 4K@60Hz (4:2:0).
• HDCP 2.2/HDCP 1.X and DVI compliant
• With built-in 4 port Ethernet Switch.
• With HDMI loop out at TX unit.
• Supports 1080p@60Hz or VESA: 1920x1200@60Hz video transmission up to 100m/328ft, and 4K@60Hz (4:2:0) to 90m/295ft.
• Transmission distance for ARC up to 100m using STP (TE CONNECTIVITY 219420-2).
• Dolby TrueHD and DTS-HD master audio pass through HDMI output
• Bi-Directional IR, RS232 and Ethernet pass through.
• POH (Power over HDBaseT) supported, only one power supply needed at either Transmitter or Receiver side.
• With ESD Protection.